Ysi Professional Plus Bedienungsanleitung PDF herunterladen (Seite 5)

INTRODUCTION

Thank you for purchasing the YSI Professional Plus (Pro Plus). The Pro Plus

features a waterproof (IP-67) case, backlit display and keypad, user-selectable

cable options, USB connectivity, large memory with extensive site list capabilities,

and a rugged, rubber over-molded case.

Reading the entire manual before use is recommended for an overall

understanding of the instrument’s features.

GETTING STARTED

InItIal InspectIon

Carefully unpack the instrument and accessories and inspect for damage.

Compare received parts with items on the packing list. If any parts or materials

are damaged, contact YSI Customer Service at 800-897-4151 (+1 937 767-7241)

or the authorized YSI distributor from whom the instrument was purchased.

Battery InstallatIon

The Pro Plus requires (2) alkaline C-cell batteries which are included with the

purchase of a new instrument. Battery life depends on parameters and usage.

Under normal conditions, battery life is approximately 80 hours for continuous

use at room temperature. To install or replace the batteries:

Turn the instrument over to view the battery cover on the back. 1.

Unscrew the four captive battery cover screws. 2.

Remove the battery cover and install the new batteries, ensuring correct 3.

polarity alignment on the instrument or the removed cover. (Figure 1)

Replace the battery cover on the back of the instrument and tighten the four 4.

screws. Do NOT over-tighten.

Figure 1. Pro Plus with battery cover removed. Notice

battery symbols indicating polarities.

* The warranty period for the non-field rugged cables (605107, 605177, 605108,

605178, 605109, 605179) is listed as 6 months. However, the true “working life” of

these sensors may be 3-9 months depending on storage and usage in solutions other

than clean aqueous samples.

** The warranty for the ammonium, nitrate, and chloride sensors (605104, 605105,

605106) is listed as 6 months. However, the true “working life” of these sensors may

be 3-9 months depending on storage and usage in solutions other than clean aqueous

samples.

1 2 3 4 5 6 7 8 9 10 ... 44 45

Keine Kommentare

Ysi Professional Plus Bedienungsanleitung Seite 5