Ysi 556 MPS Bedienungsanleitung PDF herunterladen (Seite 33)

Sensors Section 4

YSI Incorporated YSI 556 MPS

Page 27

Figure 4.2 Sensors Enabled Screen Before DO Membrane Selection

A black dot to the left of a sensor indicates that sensor is enabled. Sensors

with an empty circle are disabled.

Highlight the “DO None” entry as shown above and press Enter to display

the membrane choice screen. Consult Section 3.4.2 Membrane Cap

Selection for information on the advantages of each type of membrane

material. Blue membrane caps using 2 mil polyethylene (PE) were shipped

with your YSI 5563 and are likely to be the best choice for most 556 field

applications.

Figure 4.3 Membrane Selection Screen

Highlight the desired membrane choice – in this case, 2 mil PE - and press

Enter to activate your selection with a dot to the left of the screen. Then

press Escape to return to the Sensor menu that now shows your DO

membrane selection.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 135 136

Keine Kommentare

Ysi 556 MPS Bedienungsanleitung Seite 33