Ysi Professional Plus Bedienungsanleitung PDF herunterladen (Seite 10)

Number Key Description

Right Arrow

Use to navigate right in alpha/numeric entry

screens. Can be pressed simultaneously with

Backlight key to increase display contrast.

Down Arrow

Use to navigate through menus and to navigate

down in alpha/numeric entry screens.

Power

Press to tu rn the i nst rument on.

Press and hold for 3 seconds to turn off.

Help

Press to receive hints & tips during operation.

10 Enter

Press to confirm selections, including

alpha/numeric key selections.

Left Arrow

Use to navigate left in alpha/numeric entry screens.

Press to return to previous menu in all

screens except alpha/numeric entry.

Can be pressed simultaneously with Backlight

key to decrease display contrast.

Exit/Escape

Exits back to Run Screen.

When in alpha/numeric entry screen,

escapes to previous menu.

Up Arrow

Use to navigate through menus and to navigate

up in alpha/numeric entry screens.

MaIn dIsplay

Press the Power key to turn the instrument on. The instrument will briefly

display the splash screen with the YSI logo then go directly to the main run

screen. The first time the instrument is powered up or if the instrument

has had a battery change (with batteries removed for more than 2 minutes),

you will need to set the date and time. Follow the instructions under

System Menu | Date/Time.

The display at the left shows the run mode (main

display) with temperature in °C, barometer

in mmHg, DO in % and mg/L, and pH as the

reported parameters. The date, time and battery

level are indicated at the bottom of the screen.

The logging preference of Log One Sample at a

time is indicated at the top of the screen.

This screen also shows the message line towards

the bottom of the display above the date and

time. In this case, it doesn’t show a message

but messages will appear frequently to indicate

calibration steps, set date and time, etc.

A USB symbol

will show up on the

bottom of the display when connected to a PC

through USB with the communications saddle. The instrument will display full

battery power when it is receiving power through the USB connection.

Contrast – the contrast adjustment can be accomplished by pressing

the backlight key and the left or right arrow key at the same time.

Menu layout

Press Esc at anytime in the menus to escape back to the Run screen. The

left arrow

can be used to go back to the previous menu in all screens except

alpha/numeric entry screens. You must use Esc to get out of the alpha/numeric

screens if you want to exit before finishing or without saving changes. Functions

that are enabled appear as a circle with a dot  or a box with a check mark

Disabled functions appear as a circle only  or an empty

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 44 45

Kommentare zu diesen Handbüchern

Keine Kommentare

Ysi Professional Plus Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Ysi Professional Plus